• 조직소개
  • 추천기술
  • Star_Lab
  • R&D/R&BD
  • 공지사항

Star-Lab

재료 물리화학 연구실

책임
교수
이름 고영건 소속 영남대학교 신소재공학부
주요학력 2000년 포스텍 재료금속공학 
2002년 포스텍 신소재공학 
2006년 포스텍 신소재공학 

구성원

직책 인원 성명(담당분야)
교수 2 고성능 다기능 경량소재 코팅층 개발, 생체 및 에너지용 표면처리기술
박사 2 투과전자현미경을 통한 미세조직 해석, 우선방위기술을 통한 미세조직 해석
석사 5 세라믹-유기물 표면층 개발, 마그네슘 합금소재 내부식성 향상기술, 임피던스법을 통한 전기화학적 거동 해석, 열처리 기술을 통한 소재성능 향상기술, 금속계 산화물 제어를 통한 생체소재
학사

산학협력 희망분야

  

  

대표연구분야

   

대표기술 개요 및 개발현황

 

 2db580c2b34fc0784074febad3efd38e_1473214 

개발 관련 시제품 사진

특허

 최근 3년간 국내특허 등록: 9(2013. 07. ~ 2016. 06.)

- “알루미늄 합금에 탄소나노튜브를 포함하는 코팅층을 형성하는 방법 및 이에 의해 형성된 코팅층을 갖는 알루미늄 합금” (2013. 06. 10.) #10-1274979

- “지르코니아 입자가 분산된 티타늄 임플란트 제조 방법” (2013. 09. 02.) #10-1304989

- “통전용 마그네슘 산화박층의 제조방법” (2013. 11. 20.) #10-1333408

- “고내식성 마그네슘 합금 산화피막의 제조방법” (2013. 11. 27.) #10-1336443

- “금속분말 사출성형법을 통한 FeSi 계 자성 코어 제조방법” (2014. 03. 12.) #10-1375986

- “유리분말이 포함된 Fe-Si계 합금 자성 코어 제조방법” (2014. 09. 16.) #10-1443530

- “이속압연 공정을 통한 고강도 페라이트강 판재의 제조방법” (2015. 04. 28.) #10-1517654

- “고성형성 알루미늄 합금판재 제조방법” (2015. 09. 09.) #10-1553464

- “항균 티타늄 임플란트의 제조방법 및 그에 따라 제조된 항균 티타늄 임플란트

(2016. 04. 07.) #10-1612510

최근 3년간 국내특허 출원: 5(2013. 07. ~ 2016. 06.)

- “극저온 처리장치” (2015. 06. 05.) #10-2015-0079818

- “고균일 및 고연성 마그네슘 합금판재 제조방법” (2015. 09. 09.) #10-2015-0012681

- “플라즈마 전해 산화공정을 통한 고내식성 알루미늄 합금 코팅층 제조방법

(2015. 12. 10.) #10-2015-0171653

- “마이크로 아크 전해 산화 처리를 통한 알루미늄 합금 내산화 코팅층 제조방법

(2015. 12. 10.) #10-2015-0176116

- “알루미늄 합금 이중-산화물 코팅층 제조방법” (2016. 04. 08.) #10-2016-0043353

 

연구실적

논문

최근 3년간 주요 연구논문: 41(2013. 07. ~ 2016. 06.)

- “Influence of CNT Incorporation on the Photovoltaic Behavior of TiO2 Films Formed by High-Voltage Electrophoretic Deposition” Curr. Appl. Phy. (Jul. 20, 2013) 13(S2), 26-29.

- “Deposition of Hydroxyl-Apatiteon Titanium Subjected to Electrochemical Plasma Coating” Electrochim. Acta (Oct. 30, 2013) 109, 173-180.

- “Effect of Ammonium Metavanadate on Surface Characteristics of Oxide Layer Formed on Mg Alloy via Plasma Electrolytic Oxidation” Surf. Coat. Technol. (Dec. 15, 2013) 236, 70-74.

- “Effect of Differential Speed Rolling Strain on Microstructure and Mechanical Properties of Nanostructured 5052 Al Alloy” J. Alloys Comp. (Feb. 15, 2014) 586, 205-209.

- “Temperature Rise During Differential Speed Rolling” J. Alloys Comp. (Feb. 15, 2014) 586, 254-257.

- “Surface Characteristics and Biological Response of Titanium Oxide Layer Formed via Micro-Arc Oxidation in K3PO4 and Na3PO4 Electrolytes” J. Alloys Comp. (Feb. 15, 2014) 586, 548-552.

- “Influence of Glass Particles Incorporation on the Microstructure and Magnetic Properties of Fe-6.5wt%Si Alloy Subjected to Metal Injection Molding Technique” J. Alloys Comp. (Feb. 15, 2014) 586, 305-309.

- “Influence of Voltage Waveform on Anodic Film of AZ91 Mg Alloy via Plasma Electrolytic Oxidation: Microstructural Characteristics and Electrochemical Response” J. Alloys Comp. (Feb. 15, 2014) 586, 357-361.

- “Effect of Acrylonitrile-butadiene-styrene on Flow Behavior and Mechanical Properties of Polylactic Acid/Low Density Polyethylene Blend” Asia-Pac. J. Chem. Eng. (May 1, 2014) 9(3), 349-353.

- “Electrochemical Response of ZrO2 Incorporated Titanium Oxide Film” Mater. Res. Innov. (May 1, 2014) 18(S2), S407-S411.

- “Effect of Cu Addition on Microstructure and Mechanical Properties of Fe-2 wt-%Ni Alloy Processed by Metal Injection Moulding” Mater. Res. Innov. (May 1, 2014) 18(S2), S629-S632.

- “Influence of Sintering Temperature on Microstructure and Mechanical Properties of Fe-2Ni-2Cu Alloy Processed by Metal Injection Moulding” Mater. Res. Innov.

(May 1, 2014) 18(S2), S633-S637.

- “Formation of bTricalcium Phosphate Coating Layer on Titanium via Micro-Arc Oxidation” Mater. Res. Innov. (May 1, 2014) 18(S2), S997-S1000.

- “Effect of Deformation Path on Microstructure, Microhardness and Texture Evolution of Interstitial Free Steel Fabricated by Differential Speed Rolling” Mater. Charact.

(Aug. 1, 2014) 94, 203-214.

- “In vitro Biological Response to the Oxide layer in Pure Titanium Formed at Different Current Densities by Plasma Electrolytic Oxidation” App. Surf. Sci. (Sep. 30, 2014) 314, 221-227.

- “Microstructure and Texture Evolution in Low Carbon Steel Deformed by Differential Speed Rolling Method” J. Mater. Sci. (Oct. 1, 2014) 49(19), 6608-6619.

- “Biodegradable Polymer Blends and Composites: An Overview” Polym. Sci. Ser. A (Nov. 1, 2014) 56(6), 812-829.

- “Microstructural Characteristics of Oxide Layers Formed on Mg-9wt%Al-1wt%Zn Alloy via Two-step Plasma Electrolytic Oxidation” J. Alloys Comp. (Dec. 5, 2014) 615(S1), S418-S422.

- “Microstructure and Mechanical Properties of Severely Deformed Mg-3%Al-1%Zn Alloy via Isothermal Differential Speed Rolling at 453 K” J. Alloys Comp. (Dec. 5, 2014) 615(S1), S590-S594.

- “Formation of ZrO2 in Coating on Mg-3wt.%Al-1wt.%Zn Alloy via Plasma Electrolytic Oxidation: Phaseand Structure of Zirconia” Mater. Charact. (Jan. 1, 2015) 99, 101-108.

- “Effect of Glass Particle Addition on Microstructure and Magnetic Properties of Fe-6.5 wt%Si Alloy Fabricated by Metal Injection Molding Technique” Kor. J. Met. Mater.

(Apr. 1, 2015) 53(4), 244-252.

- “Melt Rheology of Poly(Vinylidene Fluoride) (PVDF)/Low Density Polyethylene (LDPE) Blends” Polym. Sci. Ser. A (Mar. 1, 2015) 57(2), 233-238.

- “Properties and Medical Applications of Polylactic Acid: A Review” Exp. Polym. Lett. (May 1, 2015) 9(5), 435-455.

- “Effect of Deformation Temperature on Microstructure and Mechanical Properties of AZ31 Mg Alloy Processed by Differential-Speed Rolling” J. Mater. Sci. Technol.

(May 1, 2015) 31, 498-503.

- “Microstructure and Plastic Anisotropy of Fine Grained AZ31 Magnesium Alloy Fabricated by Differential Speed Rolling at 473 and 573 K” Mater. Res. Innov.

(May 1, 2015) 19(S5), 477-480.

- “Strain and Crystallographic Texture Evaluation of Interstitial Free Steel Cold Deformed by Differential Speed Rolling” Mater. Lett. (May 15, 2015) 147, 38-41.

- “Influence of ZrO2 Incorporationin to Coating Layer on Electrochemical Response of Low-Carbon Steel Processed by Electrochemical Plasma Coating” Surf. Coat. Technol. (May 15, 2015) 269, 314-318.

- “Heat Dissipation Properties of Oxide Layers Formedon 7075 Al Alloy via Plasma Electrolytic Oxidation” Surf. Coat. Technol. (May 15, 2015) 269, 114-118.

- “Development of Titanium Oxide Layer Containing Nanocrystalline Zirconia Particles with Tetragonal Structure: Structural and Biological Characteristics” Colloid. Surface. B

(Jul. 1, 2015) 131, 47-53.

- “Finite element analysis of deformation behavior in Al-2.2 wt.% Mg alloy subjected to differential speed rolling” J. Mater. Eng. Perform. (Aug. 1, 2015) 24, 2990-3001.

- “Effect of Na2WO4 in Electrolyte on Mechanical Properties of Oxide Layer on Al alloy via Plasma Electrolytic Oxidation” Kor. J. Met. Mater. (Aug. 1, 2015) 53(8), 535-540.

- “Effects of concentration of Ag nanoparticles on surface structure and in vitro biological responses of oxide layer on pure titanium via plasma electrolytic oxidation” Appl. Surf. Sci. (Aug. 30, 2015) 347, 574-582.

- “Rheological Properties of ABS/Wood Composites” Eur. J. Wood Wood Prod.

(Sep. 1, 2015) 73, 701-703.

- “Material Properties of Polyethylene/Wood Composites: A Review of Recent Works” Polym. Sci. Ser. A (Nov. 1, 2015) 57(6), 689-703.

- “Effect of Roll Speed Ratio on Microstructure Evolution and Mechanical Properties of 0.18 wt% Carbon Steel Deformed by Differential Speed Rolling” Mater. Lett.

(Dec. 1, 2015) 160, 213-217.

- “Effect of Sodium Benzoate on Corrosion Behavior of 6061 Al Alloy Processed by Plasma Electrolytic Oxidation” Surf. Coat. Tech. (Dec. 15, 2015) 283, 268-273.

- “Mechanical Properties and Compatibility of Polylactic Acid/Polystyrene Polymer Blend” Mater. Lett. (Feb. 1, 2016) 164, 409-412.

- “Pore Size Effect on Cell Response via Plasma Electrolytic Oxidation” Surface Eng. (2016) (Jun. 1, 2016) 32(6) 418-422.

- “Photocatalytic Activity of TiO2 Film Containing Fe2O3 via Plasma Electrolytic Oxidation” Surface Eng. (2016) (Jun. 1, 2016) 32(6) 443-447.

- “Annealing Characteristics of Ultrafine Grained Low-carbon Steel Processed by Differential Speed Rolling Method” Metall. Mater. Trans. A (May 1, 2016) 47(5) 2319-2334.

- “Fabrication and Materials Properties of Polystyrene/Carbon Nanotube (PS/CNT) Composites: A Review” Eur. Polym. J. (Jun 1, 2016) 79, 36-62.

보유장비

- PEO Apparatus set

- AC/DC Power Supply Machine

- DSR Machine

- Potentiodynamic Polarization Tester

- Nano Indentation

- Universal Testing Machine

- Vickers Microhardness Tester

- Optical Microscopy(OM)

- Electrochemical Analysis

- Microstructure Image Analyzer Software​

- ​Tenupol 5

- Electrical Discharge Machining(EDM)

- Manufacture Machine set

​- High-Temp. Furnace(up to 1300℃)

- CO2 Incubator

- Cryogenic Machine​

Copyright(C)2018 대구 경북 BRIDGE 사업단. All Rights Reserved.